COMOWARE Hole Saw Kit for Wood- 16 Pieces 3/4’’-5’’ Full Set in Case with 1pcs Hex Key, 2pcs Mandrels and 1pcs Install Plate for PVC Board Plastic Plate Drilling Drywall and Soft Wood

Not a good buy for any practical utility. May be ok for thin plastic. The drill bit had trouble getting through a 1.5 inch pine board. I used a 7/32 drill bit to pre drill. The 1+1/2 inch hole blade wasnt very sharp. The saw dust wasnt being ejected out, despite pulling it out every 1/8 inch or so. I ran my drill at half speed and paused every 30 seconds (hoping not to build up too much heat). I thought maybe I wasnt spinning fast enough to get the sawdust out of the teeth so I speed it up. The wood started smoking (of course) so I stopped. When I ran the drill in reverse (slowly) to pull out the hole saw, the drill bit broke (see pictures). Also, the depth of the saw is a hair shy of an inch (so getting through a 2x4 takes two passes). Just thought Id iterate that here because it didnt help my frustration (I fully take responsibility) . Reading it and experiencing it are two different things.

I needed a hole saw to make corn hole tables and this one was very inexpensive than most. It was a little difficult to put together, but it worked.

Had to cut new hole for dryer vent. Worked great

It is a nice product for the price and it performs well

Unassembled with no instructions.

Truly for thinner, lightweight materials such as drywall and plastic, which is what I purchased this for. I also used it to cut for a tub/shower surround hole to attach the finish trim piece. Worked great for that.

Got the job done, but not a tool youre going to want to use more than once or twice. Not sharp at all and the precision on the hole size isnt great. Cheap and takes a bit of elbow grease. Id imagine itd be great on something softer, like drywall.

I was working with a pine board and the saw struggled to cut the hole. Great price, but only for use on very soft materials.

Worked great! Only needs instructions on how to assemble the mandril.

This isn’t the deepest hole saw but it will work great on anything like plywood or Sheetrock. Great price for this many blades and comes with a case.