EPAX nFEP Film Sheet 200 x 140mm Thickness 0.125mm for E6/X1 and Other 5.5/6 inch UV Resin 3D Printers, Pack of 3 Films

Really helps in printing do the resin doesnt strict to film easy clean up

I was super excited to get a Sonic Mini 4K printer, but then incredibly disappointed by failed print after failed print which wasted many hours of my life. I sanded the build plate with 80 grit sandpaper each time and cleaned and lubricated the NEP film each time, but still the prints failed to stick to the build plate and stuck to the NEP instead. Only after increasing the exposure time way up did prints stick to the build plate. But of course then the prints were overcured and the detail destroyed. I finally gave up and tried this Epax NFEP film and, bingo! Successful prints the first try. Recommend. I ordered the 3 pack and I did receive 3 pieces.

(To no fault of this FEP) The first sheet of this FEP I used resulted in about 10 straight print failures that left a lot of hardened resin on the FEP itself. Shockingly, when I finally discovered my base problem with the printer and resin (again, not the FEPs fault), I ran another print with the SAME SHEET that endured 10 failures before and the print came out FLAWLESS. Before buying this, a print failure of this caliber almost always resulted in an immediate replacement of the FEP and a couple more dollars down the drain. Obviously, this sheet didnt last a ton longer having been treated pretty brutally, but how well it performed after so many failures is a true testiment to the incredible engineering that went into this product. Im never buying another brand again.

NFEP has more flex and better adhesion resistance. This makes changing the film easier since you dont have to worry about tensioning the film correctly. I just slapped it on and tightened it down and it works perfectly every time!

Im new to 3d printing and of course my first 3 prints failed. I installed one of these nFEP sheets and have not had a failure since! Excellent product!

I bought cheap FEP film and every print had something fall off the build plate and 2 sheets of the cheap FEP were damaged by the failed prints. THIS nFEP fixed that issue. Every print so far (4) has been beautiful.

I have gone throught the 2 that came with my printer. Just have to be careful with scraping the film. Glad they dont cost very much and I have not damaged any more so far.

Product works amazingly well and it is hands down the best fep I have used. My only complaint is that the sheets are filthy when taken out of the package. Covered in tons of specks and some sort of adhesive dingle berries. I was able to gently clean them with microfiber rag and some water without damaging the fep or I should say nfep. I recommend trying these sheets if you are having fep sticking issues.

I bought this for my Phrozen Sonic Mini 4k on the recommendation of a few others who have changed out their factory FEP on the same machine and my 3D printer has been working flawlessly since. Im extremely happy with the results now and I no longer get prints sticking to my FEP. Highly recommend this over the factory FEP on the Phrozen Mini 4k, at least. Cant go wrong with this one either way.

Never again using regular fep sheets… these are excellent