Hakko FX888D-23BY Digital Soldering Station FX-888D FX-888 (blue & yellow)

In the middle of a project my old (very old) Radio Shack soldering station ceased functioning. For several hours I looked at replacements, Read all the reviews good and bad. Watched some Youtube videos and finally decided on the the Hakko FX-888D. I never pay for overnight or 2nd day delivery but I really needed a soldering station to continue my project and was glad I did to get back to work. The Hakko heats up fast, very fast. Especially compared to the old Radio Shack. I bought some extra different shaped tips. This is my first experience with a tip that isnt a larger/medium cone shaped tip. So far so good. I have had the unit for a week now and have used it every day and I have been very happy with the purchase. Why only 4 Stars - The enclosed documentation is missing 5 pages. The document enclosed talks about the presets but doesnt show you how to. The documentation does have a reference to a web site where you can get the full set of instructions. The 5 missing pages include 3 pages for doing the presets. The other 2 pages are details on the parts and the internal construction of the unit. Its a little point but the cost of a couple mores pages of paper cant be a profit breaker. So for now only 4 stars - but very happy with my purchase so far.

This Hakko FX888D is so AMAZING . It performs on a level no other soldering iron Ive ever used performs at . I wondered how an item could get so many 5 star reviews, well all you got to do is try it and you will know. This soldering station is truly out of this world incredible .

My old Weller and Radio Shack irons took forever to heat and seldom reached high enought temperature even with a clean and tinned tip. This heats up fast and holds an adequately high temperature.

Great iron…it gets to temp quickly and accurately. Quality product

I was pleasantly surprised by this station, the temperature accuracy was within 15 degrees of the displayed temperature straight out of the box. After calibrating with my thermometer, it has remained accurate with little deviation. The user interface is no intuitive, but after watching a video on YouTube, it is fairly simple. Overall, I would recommend this station and I would not hesitate to purchase again.

I went through 2 cheap soldering stations that lasted a few months before they failed. This was highly recommended by a knowledgeable Utuber and I am still impressed after owning one since 2018. I dont understand the complaints about the user interface as it is very simple and easy to use. Only thing I can think of is some of the reviews are for a different product, something that is pretty common here, as this doesnt have a touch screen and the controls are separate up/down buttons to change temp and an on/off rocker with on the side - how can that be hard to use? I dunno. I have yet to need to change the tip and I use mine a few times a week. If you want a good iron soldering station this is it, period.

Ive been a technician for over 30 years and always used the big W brand soldering stations at work. I finally decided I wanted a decent station at home -- instead of a direct plug-in type pencil. I looked at the usual suspects but decided to try simple instead of high tech. Hey, all I want is a soldering pencil, not a flashy tech toy. This little guy has a classic retro kind of Art Deco of look to him. From the photos here you might think that the brightly colored bodies of this Hakko station are plastic. Theyre not. Everything is cast metal, maybe aluminum or more likely pot metal. It feels very sturdy and solid and definitely not like cheepo plastic. The bright color is baked on and matte in finish. The unit is quite heavy (transformer) as well as sturdy and simple. You dont get a fancy digital temp readout or glitzy high tech gizmos to impress your non-techie friends. This is a simple and competent iron with good temperature control and a nice solid feel to it. It would be nice if it came with a few more tips but the one supplied is the type of chisel point I use most often. The price could be more reasonable but its made in Malaysia and not China. If the heating element is reliable then this little guy could last indefinitely. Although I didnt look Im sure the temp control circuit is very basic and reliable. Ive used it for three projects and it works great. It heats up to mid dial @700F in 30 seconds and is immediately responsive to temperature loads. I like it.

I had purchased a cheap rework station and it was absolutely terrible. Would only solder one leg of a resistor before cooling to the point I could not solder the second leg. Returned it and bought the Hakko 888D. The Hakko made a world of difference and have been soldering with no trouble since! This is the right tool for through-hole and SMD PCB soldering. Do not waste your time and money with the cheap units - you will end up here anyway! The tip that comes with the unit is a small chisel tip that is perfect for PCB work. If you are looking at this for PCB work like me, make sure you combine this with the right solder as well. Kester 63/37 .020” (.5mm) leaded solder is the right solder to go with this station. I have seen some reviews about the interface being difficult. That was not the case for me. There are several videos on YouTube by Hakko that walk you through setting up the device and the settings. I highly suggest watching those while waiting for your unit to arrive!

The price on this unit was more than I usually like to pay, which is why Ive struggled most of my life with inadequate soldering irons. But one day, while trying to take some capacitors off a circuit board, holding the iron on there endlessly in frustration, I decided enough was enough. I scoured the reviews in Amazon, initially looking at a Weller unit, but someone pointed to the Hakko unit and I was impressed by the number of positive reviews. So I plunked down my hard-earned cash, and waited. One week later, I unboxed the unit, noticing the solid construction. And after trying it, I knew I had reached soldering iron nirvana! Here are the features I really appreciate: 1. Hot in seconds flat. Theres a little red LED on the front that tells when the iron is heating. When it goes off, the tip is ready. I didnt time it but turning the heat dial up half-way only takes about 5 to 10 seconds before the tip is ready. Wow! so different from what I was used to. 2. Performance. Most soldering can be done at about half temp. A few times Ive cranked it up all the way, to melt some stubborn joint, and it really works! 3. The brass tip cleaner. I really like the little brass wool that you can rub the tip on. It works very nicely and is much more convenient than water/sponge (although you can use that too). 4. Good stand. Its solid and doesnt fall over easily. Same with the transformer-temp control unit...its really heavy. 5. Flexible cord. Dont you just hate it when you get a tool that has a stiff plastic cord that never seems to straighten out? Well this one doesnt have that. The cord from the iron to the controller is nice and flexible. 6. The heating takes place so quickly that as soon as Im done a joint and have a break, Ill just dial the temp down and leave it on low, knowing that I can get it back up in less than 10 seconds. Im sure that helps the tip last longer. Theres really nothing not to like about this unit. Well, the tips are a bit expensive (about $10), but they look like they will last a while. Ive also seen some sets of tips on eBay for less...not sure about the quality of these though. Im in my early 50s now, and am a bit ashamed that Ive been doing occasional electronics work for about 30 years without such a good tool. Im pretty sure, unless my unit suffers from a defect, that this will be the last soldering iron I buy for the rest of my life. Should have bought it a long time ago...

My first professional soldering iron was a Weller and Ive always been skeptical about anything else. We use Wellers at work. Well, this guy gave this model a very nice review - better than the similarly priced Weller, so I went with it. The things I do not like: 1. That silly sponge. I will probably replace it. It is functional, but I dont care for the feel of it. I like to abuse my sponge. Always keeping the tips clean and shiny. This is less than perfect. 2. The UI should have been a 2 button up-down configuration. What I like: 1. It maintains its temperature ferociously. When soldering solid copper wires, this is a big help. The thermal output is great and it maintains temperature like a beast. 2. It has a great feel overall. Solid. 3. I bought a tip assortment from Hakko, but the tip that comes with it is a great general purpose tip. good for all but the smallest SMD parts.