Homydom Wood Organizer and Lumber Storage Metal Rack with 3-Level Wall Mount, 2 Pack

(-) The first two lag bolts I tried snapped off (broke). Both bolts broke at the same spot -- where the threads start. I pre-drilled the holes, so that wasnt the problem. I switched to using my own lag bolts and there were no more issues. The hardware provide with the racks is poor quality. (+) The design is generally good; easy to install and adjust. The quality of the racks is pretty good. Ill be curious to see how the finish holds up over time. They feel strong enough for most uses. Good for trim and smaller dimensional lumber. (-) Im puzzled by one design feature. The top and bottom rack each have two holes -- for adjusting height. The top rack only fits on the highest setting because the mounting bolt prevents use of the lower holes. The bottom rack only fits on the higher setting. If you try to use the lower setting, the rack arm drops below the mounting bracket. Very strange that they would provide the additional adjustments when two cant be used. The only explanation I can think of is that they wanted a symmetrical bracket, where theres no top or bottom.

Most folks who need to rack up materials could build the racks. Don’t. These are so easy to put up and reconfigure. I contemplated for months in my new house how to arrange my garage/shop and then got these as a “temporary” stand in. The floor is now clear and I probably will have these the rest of my life. So easy, and I could hardly buy the tubing to build my own for the price.

First off, I was pleasantly surprised that you get TWO pairs of racks, not just one. When it said 2 pack, I thought it just meant a pair of them. Installing them was pretty simple, its just two screws per vertical piece, and then you add the horizontal arms with a steel pin and secure it with a a cotter pin. Everything is thick metal, and it doesnt look cheap or flimsy. But the proof is in the performance, and it is performing beautifully. I immediately put 150 board-feet of white oak and pine, which weighs approximately 600 lbs, and it held up perfectly (see picture). These will probably handle as much wood as you can stack in them. Overall, its a great product. I cant find any fault with it. 10/10, Ill definitely be getting another when I get a bigger space.

Overall this would have been very good if not for some quality control issues. 1. The holes in several of the pins were not drilled all the way through. 2. One of the arm brackets was not welded on straight and could not be installed. I was able to drill the pins pretty easily with a drill press. The crooked bracket on one of the arms was a bigger problem. I could not even get the pin through the hole. I used a rat tail file to open up the holes until I was able to get the pin in and the arm was sitting straight. I had to open up the holes a bit on another arm also because it was sitting a bit high relative to the other arms. It is critical to have the arms line up across all 4 racks if you dont want to have warped boards. In the end, I was able to make it work but I had to put in extra work to make it useable.

Easy to install, just what I needed to organize my boards for my woodshop.

I purchased a double pack (glad I did) and found them to be very easy to install and sturdy. The racks freed up some valuable floor space. There were ZERO defects and, except for the drywall-type mounting screws included (sorry, but these thin screws dont inspire much confidence in their durability), I found the components to be good quality. The racks are holding up cherry wood planks that are very heavy 9-10 foot long and 10 inches wide by 1 inch plus thick, so the whole system is holding up well. The only regret I have is that I waited so long to purchase and then mount them.

or workshop. This is a great organizer not only for wood but other stuff too such as PVC. I like that you can push the arms up and out of the way when not using them. I can attest though that the screwheads on the manufacturers screws are a bit weak and I bought more durable ones elsewhere. DOWNSIDE: When I bought this it only came with one mount. Called Amazon and they sent a replacement that also included only one mount. Hopefully this snafu is fixed because it should have been a pair. Thankfully I was told to keep both to make the set (and was only charged one time)

New homeowner here and needed to store my spare wood in a tight space. These worked out great! No issues thus far. My only concern was the included hardware so I purchased 3 5/16 lag screws to make sure these arent going anywhere. Id give it 6 stars if these were able to extend and retract in height.

I got three 2-packs and installed three across and 8 foot long wall, set into wall studs and have (so far) loaded two levels with 8 foot timbers, 6 8/4 teak and 5 8/4 syp. Swallows up that load with no sign of any strain. Got more to load tomorrow. Installation was easy, relatively quick and - with care not to miss any studs - very solid. Two people made leveling the tops of each set easy using a straight edge and level to alignment. Cant find anything to complain about. Like my dad always said: If you aint got time to do it right, where you gonna find the time to do it over? This product has been done right.

Easy installation, with the simple included instructions and most of the hardware. Plenty of hardware for mounting to wood studs is provided, but for this masonry install, I (following Tapcon guidance) predrilled the blocks, then used 1/4x2-3/4 Tapcon concrete anchors. The longest part of the installation was moving and organizing my lumber to the rack. The rack had been loaded with over a hundred pounds of lumber and siding for over a week and has not budged. I now have a happy spouse with wood safely stored out of the way.