LIAN LI High Airflow Micro ATX PC Case, RGB Gaming Computer Case, Mesh Front Panel Mid-Tower Chassis with 2x140mm ARGB PWM Fans Pre-Installed, Tempered Glass Side Panel (LANCOOL 205M MESH, Snow)

Very nice case, it is extremely spacious and cord friendly management. It is very breathable and its easy to clean dust, the glass also does not collect grease that easily and stays nice and crystal clear and it comes with 3 case fans(non RGB). It can mount an ATX and micro ATX motherboard, a max it can hold a 350mm video card, and it has room to mount two 2.5 SSD and you can have another two 2.5 or two 3.5 in the cage with your power supply.

this is an amazing budget tower case. i had been looking at the corsair tower case for my build but went for this one instead and it’s been amazing and does its job. only reason i give this 4 stars instead of five is because my glass panel had shattered into pieces when i had tried to take it off a couple weeks after i finished building my pc. it was relatively easy to find a replacement panel but it really bummed me out

Best looking case I could fine for my price range. It feels high quality and looks super sleek. The magnetic dust filter on top is super easy to clean. The case was the perfect size as well.

Although the case is small, there is still plenty space for long graphic card. I have I7-10700 and 5700XT and I have no heat issue at all. The magnetic filter is a big big plus for me. It is much easier to clean dust. But, there is a tiny bad design. Once you install the dedicated GPU, there will be a big hole on the slot, which was covered by a piece of metal if you dont install GPU. Overall, this is still a good buy from Lian Li

This case was an absolute pleasure to build in. So many quality of life’s features in here that makes it much easier to install your parts, such as fan brackets, man holes around the motherboard for cabling, and the ability to quickly remove any part of the frame for better access. The only problem I faced was the top fan bracket, where it can only be installed one direction (even though it looks as though it can be both ways). In reality that was my fault though, and only a minor thing. The case is manufactured well and I’ve never has thumb screws in the back glide in so smoothly. You can feel the quality and precision when building. I highly recommend this case.

This case replaced a fractal define mini c. I wanted tempered glass and expandability. Didnt realize the attention to detail and how easy it is to install various aspect of the build. This is considered budget but I argue its premium for the price. Recommend this case if you want a nice slick easy build.

I used the Lancool 205 Micro case for my first PC build and I couldnt be happier! Its an amazing micro case and I absolutely loved how it turned out. Im not at all an expert in PC building, but I hope that my feedback helps a bit! Here are my specs - GTX 1050 - GIGABYTE B550M DS3H - Crucial Ballistix 3200 MHz DDR4 - ARCTIC Freezer 34 eSports DUO - GIM KB-28 RGB Case Fans, 3 Pack White 120mm - EVGA 220-G3-0750-X1 Super Nova 750 G3, 80 Plus Gold 750W - Seagate BarraCuda 2TB Internal Hard Drive HDD - Crucial MX500 1TB - AMD Ryzen 5 3600 Pros - Really easy to work with - Lots of different ways to route cables - Simple and minimalist design - Micro tower is small enough to fit on top of a desk without looking too big - Air flow on the back, top, front, below the psu, and on the sides of the front panel (enough to fit total of 5 fans // 1 fan in the back, 2 fans on the top, and 2 fans in the front) - Removeable Magnetic dust filters on the top and the bottom - Fits the ARCTIC Freezer 34 Esports (grey/white) PERFECTLY, goodness I was worried that my cpu cooler wouldnt fit, but it fit absolutely perfect with a tiny bit of room between the tempered glass and the front of the cpu cooler - the gap in the front is big enough to fit a custom rgb panel - the temps are nice! my GPU runs around 35-41°C - the glass feels very high qu (its pretty heavy too!) Cons - I wasnt sure if this was the motherboard or the case (maybe it was just me?) but I found it very difficult mounting the motherboard onto the case. When I would screw the motherboard onto the case, I just could not get them to go inside. I managed to get the corners in, so I left it at that. This may have just been my fault though and I didnt want to strip the screws :( - This is me just being a little picky, but I wish the little raised cable management things in the back of the case (Im not sure what the technical term is) was slightly larger to fit bigger zip ties and velcro cable ties - I wasnt sure if the case was supposed to come with a mounting tray, but mine didnt come with any (Im still not sure if the mounting is included or not) so I put my HDD in the drive bay and I placed my SSD right on top of the drive bay and zip tied it down Overall, the microATX case is absolutely beautiful and very well made! Its user-friendly and great for beginners that want a smaller build!

I ordered this case to upgrade the airflow to my pc as well as get some rgb into my setup. After installing my computer into the case, the rgb on the fans decided to stop working. It was clearly a problem with the fan controller on the back of the case. I decided to give the case another try and buy another one and return my faulty one. This time after installing my computer into the case, the rgb worked fine but the rgb controlling buttons on the front panel are faulty. The only reason why I’m not returning this one also is because I don’t want to go through the hassle of buying another case and swapping it over again. The Lconnwct software is a joke and doesn’t work with the case. I suggest you look for another case if you planned on buying this one. I will most likely never be buying a Lian li product again.

This is definitely a good value case. Everything was easy to install with room to spare, granted I dont have much in there right now. Tempered glass is nice, make sure to remove the cellophane stuck to it. My only real complaints have to do with the front panel. It just snaps in without any screws, picking it up once I almost dropped it because the panel popped out so be careful. I cant say the mesh dust filters do much either, still getting a ton of dust sucked into the case. Overall happy with it however.

Case seems nice, panels fit together well, as do dust filters on top and front. The main issue I had with the case is that it was supposed to support a 280mm radiator in front, and while the bracket to attach the radiator does support it, the cable port in back gets in the way. Basically, if your radiator including fans is greater than 1.75 (or slightly less), it will not fit. I understand the Arctic Liquid Freezer II 280mm is exceptionally large at 2.5, but my other radiator would not fit either at 2. Lian Li website indicates the top would support a 280mm as well, but fitment was even worse there. Had to send the case back.