MILAPEAK (Real 18AWG 43x2pcs Strands) 10 Pairs DC Power Pigtail Cable 12V 5A Male & Female + 10 Pairs DC Power Jack Plug Adapter Barrel Connector for CCTV Home Security Surveillance (2.1mm x 5.5mm)

UPDATE: After a few months, Im throwing away the screw connectors. The pigtails are OK, but there is a spring clip that blocks the opening of the screw terminals and keeps small-gauge stranded wire from entering. Several have had open circuits inside, which is tough to debug. Screws continue to strip. Tried going back to valley ent, theyve changed to this style also. See Item B079RBL339 for the Chanzon part I finally settled on. My initial order had all one gender of pigtail, seller was quick to replace with another complete order. All good! Until I started dipping into the pile of screw-terminal connectors. Many have screws that strip easily (Ive been using these type connectors for years on CCTV cameras, and never stripped a screw). None have clamp openings that are actually open: I cant push in CAT5 or small gauge stranded wire because its not stiff enough to push past the metal tab even with the screw all the way out. These commodity connectors all LOOK the same, but theyre not all MADE the same.

Just received this product. Well made, good value. Exactly as described.

Perfect for making easy to connect and disconnect 2-way sources

For whatever reason I constantly need these things. Buck and boost converters, running stuff off old computer power supplies and so on and on. Easy connection to power supplies for all sorts of purposes. The connector is almost THE standard size for all wall-wart type power supplies, particularly the ubiquitous 12v variety. I used up a pile of these already and am delighted to replenish to stock.

I bought them as general purpose connectors and have not applied them to anything yet . I think they will be very useful

I only have one slight complaint A lot of the connections feel a little loose and you have to bend the connectors or the prong to get it to fasten together snug. I was concerned of how well the clamps would hold the wire but they proved to be outstanding as long as you use The right gauge wire (see the pic). if you want to use a lighter gauge wire then it helps to apply solder to the wire prior to installing it in the clamps the solder makes the wires a little thicker and make the connections much more secure. It’s definitely a good buy but don’t expect premium quality. Some are bent a few are straight. I would recommend useing a fingertip type of screw driver ( nothing that rests in The palm of your hand while in use )A standard screwdriver allows you to over tighten and strip the screws. Don’t worry they still grab very well. When I tested them they held over 30 lb of weight before they finally failed and the failure point was not the screw connectors but the plastic housing itself split in half

quality good

Awesome product simple to solder to light strip. Very pleased.

Worked great for my project! Just oddly, one connector seemed to had previously been lightly used but still in new condition.

Works