Rubber Sheet Warehouse .125 (1/8) Thick x 4 Wide x 10 Feet -Neoprene Rubber Strip Commercial Grade 65A, Smooth Finish, Solid Rubber, Perfect for Weather Stripping, Gasket, Costume & DIY Projects

I repainted weight racks and wanted to protect the area the weights rest on. I needed 6 foot strips, ranging from 2 to 4 wide - it was most cost effective to buy the large roll and cut the strips I needed. The rubber did have a smell, but it always will at first and then goes away eventually. The roll measured just over the size I ordered (both length and width) and the edges were cut straight. I marked with a pen (and could see the line) and cut with a razor blade (my cuts were straight enough). I scuffed the painted surface then cleaned it and the rubber strips with rubbing alcohol. Youll need plenty of ventilation and a mask when using Contact Cement (I used Dap Weldwood). Just brushed it onto both surfaces, waited about 20 mins, and then laid the rubber strips on the rack. The 6 ft long strip were flimsy, so two people were needed to lay it, we tried not to stretch it but every strip we laid had to have the end length trimmed again (maybe 1/4 in to 1/2 in - which we cut off with a scissors). It was not instant contact, we could pick it up again and reset it - and the final contact stayed firm. We put the weights on right away (5 lbs through 120 lbs) and it looks good and I expect it to be durable.

I purchased this over a year ago to make inner fender extensions after doing a body lift. I left the rubber sheet laid out on some pallets in the weather all that time, so it got exposed to the elements. There was one tear caused by UV rays and my leaving it folded - all my fault. I finally made the extensions, and wish I had done it sooner! I dont have to listen to so much injector ticking now!! This stuff is nice and thick, but easily cut. I ordered another sheet to do the rear of my truck.

Used two strips to cover entire width of trailer. Seals hinges from moisture, keeps the kitchen area completely dry. Perfect solution.

Purchased a 10ftx12x3/16 neoprene strip to replace a damaged and deteriorated rubber backing for our mud flap on the rear of our motor home. Found it was very easy to work with the rubber sheet, using the old rubber sheet as a template to drill holes for the chrome lettering and the metal back plate. The rubber material feels very durable and looks good as the base for our mud flap. Hopefully we will get many years of use.

Rubber strips as ordered.

Used it to protect my bathroom floor in front of the shower

Used to make wind flap in my dogs dog house. Works great. Supple and flexible, hangs nice and straight. Seems very durable. I also ordered custom cut rubber strips to put between ladder rack and my pickup bed rails. Product came cut exactly right, and the cuts were perfectly straight. I used slightly thicker rubber for the bed rails than I did for the dog house. I will do business again. People complain about the odor. It just smells like a tire shop. But once it airs out for a day or two, the smell is gone. Not sure what all the fuss is about.

Buenos

Don’t expect to do a bunch of glueing this material to anything. It’s slicker then snot and I have yet to be able to glue it. But it’s well made and can be clamped or screwed down easily

I used this to close the gap between the top of my shop door and the frame. Closed it up nicely and doesn’t leave any marks on my door.