Rubber Sheet Warehouse .125 (1/8) Thick x 4 Wide x 10 Feet -Neoprene Rubber Strip Commercial Grade 65A, Smooth Finish, Solid Rubber, Perfect for Weather Stripping, Gasket, Costume & DIY Projects

Smells absolutely horrible. Attempted to air it out for several days but it still stinks to high heaven. I cannot use it for the intended purpose because it would be indoors and the smell is too strong and off putting.

I repainted weight racks and wanted to protect the area the weights rest on. I needed 6 foot strips, ranging from 2 to 4 wide - it was most cost effective to buy the large roll and cut the strips I needed. The rubber did have a smell, but it always will at first and then goes away eventually. The roll measured just over the size I ordered (both length and width) and the edges were cut straight. I marked with a pen (and could see the line) and cut with a razor blade (my cuts were straight enough). I scuffed the painted surface then cleaned it and the rubber strips with rubbing alcohol. Youll need plenty of ventilation and a mask when using Contact Cement (I used Dap Weldwood). Just brushed it onto both surfaces, waited about 20 mins, and then laid the rubber strips on the rack. The 6 ft long strip were flimsy, so two people were needed to lay it, we tried not to stretch it but every strip we laid had to have the end length trimmed again (maybe 1/4 in to 1/2 in - which we cut off with a scissors). It was not instant contact, we could pick it up again and reset it - and the final contact stayed firm. We put the weights on right away (5 lbs through 120 lbs) and it looks good and I expect it to be durable.

Item purchased to line fishing rod holders. Product arrived on time and accurate to description but was dirty and had to be cleaned prior to use.

I use this on my 12 and 15 pound rock tumbler barrel lids. Works great!

I used it as SUV mud flap. It is easy to cut. But it is not durable and easily torn and worn. It lasted only one year at the fender. It is very stinky so it is not good used indoor.

I purchased this over a year ago to make inner fender extensions after doing a body lift. I left the rubber sheet laid out on some pallets in the weather all that time, so it got exposed to the elements. There was one tear caused by UV rays and my leaving it folded - all my fault. I finally made the extensions, and wish I had done it sooner! I dont have to listen to so much injector ticking now!! This stuff is nice and thick, but easily cut. I ordered another sheet to do the rear of my truck.

Works well as a mat for crafts, but the awful smell is very strong and wont go away despite leaving it outside most of the time.

Don’t expect to do a bunch of glueing this material to anything. It’s slicker then snot and I have yet to be able to glue it. But it’s well made and can be clamped or screwed down easily

I used this to close the gap between the top of my shop door and the frame. Closed it up nicely and doesn’t leave any marks on my door.

Almost gave it 5 stars. Then almost gave it 4. Although the rubber feels very strong and durable,....... .. the smell is truly the worst scent I have ever smelled on a piece of rubber. I honestly have to keep it outside because it is impregnating my entire living room airspace and it smells so toxic . Maybe it will de-scent in time.