TRUE COMPOSITES Carbon Fiber Sheet & Epoxy Resin Kit (36 x 6 + 8oz of Epoxy) 2x2 Twill, 3K, 5.7 oz. - Carbon Fiber Fabric, Carbon Fiber Repair Kit, Kit de Lámina de Fibra de Carbono y Resina Epoxi

I like it and it is what I ordered, the only thing I don’t like is that tape around the carben sheet. I don’t see it serving any purpose.

Worked well enough to patch a crack in the down tube of my carbon frame mountain bike.

Easy to use. We watched utube

Only con was application. Other than that...I have tried 3 other products...this one actually works. Still holding up and providing protection.

I have repaired fiberglass and carbon surf/sup boards for decades in this repair on a very high end sup. The carbon sheet is almost impossible to cut and place without it unwavering and the epoxy will not set at all. I added some microballons on the second coat but nothing. It’s like they sent wax instead of hardener Neither is labeled How to even clean this up and start over. Ahhhhh. This product is terrible

decent kit for small to medium carbon fiber repairs. instructions provide enough detail to use. will be used on CF racing fuel tank, seems like will work just fine.

Did not like the high price for just few items, needed additional, tools (sand paper, brush non sticking paper) to complete job. Used this product to repair bike frame. Its ok.

The carbon fiber and resin combo made it easy to just mix the resin and apply. The 1:1 mixing ratio didn’t require much thought. The only thing that took a little more care was working with the carbon fiber. Cutting the carbon was easy, but the carbon fibers started to flake of fairly easily until resin was applied. It could be the carbon fiber thickness or my lack of knowledge on how to properly work with carbon fibers.

This product worked great for my carbon bike frame repair. I made the repair much thicker than I may have needed, because I am very concerned of the strength of the repair. This product arrived in the mail quickly. The resin was slow to cure and needed nearly two days to fully cure; but this gave me a lot of working time with wrapping the layers of carbon weave and with removal of trapped air bubbles. I suggest using very sharp scissors to cut the carbon weave thats wetted with the resin on pattern marked parchment paper; or else it will fray apart on you. I practiced on a broken carbon fishing pole before doing my bike. The bond strength and repair strength was excellent on my fishing pole test piece. The bike frame repair is holding up well so far with 300 miles of rough LA roads and my 230 lbs weight.

The only problem is they didnt list on the bottle what is the mixing ratio,, there is a 1 to 1 and 2 to 1. Other than that it great