10Gb SFP+ RJ45 Transceiver, 10Gbase-T SFP+ Ethernet Module Support 10G/5G/2.5G/1.25G, Compatible with Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, UniFi, Meraki,MikroTik,Supermicro and More, 30m

(852 reviews)

Price
$8.88

None
Quantity
(40000 available )

Total Price
Share
147 Ratings
115
11
4
5
12
Reviews
  • Len Ricupero

    > 3 day

    Works great with my Tp link managed switches....I have two switches connected together and use these ..Not much to say but they work great and price is right

  • Lee Kennedy

    Greater than one week

    Ive used these H!Fiber.com 1000Base-SX Transceiver Gigabit Multimode SFP to LC Modules on two occasions and both times theyve worked well. No problems or fuss just plug and play.

  • Charles Johnston

    > 3 day

    I recently purchased a Cisco Nexus 3064-X with 48 10Gbps SFP+ ports. I needed something that would allow me to connect a FreeNas sever with 2 10Gbps RJ45 Nics to my new switch. I took a chance and purchased four of these and quality CAT8 Cables to ensure I would have a solid 10Gbps link to the new switch. These have worked flawlessly so far. I now have two 10Gbps links to my FreeNAS server and I used the other two to connect my pfSense Router to the Nexus using LACP. The pfSense router does not have 10Gbps Nics but it had no problems negotiating a 1Gbps link to each port in the LAG. More time will tell if these are rock solid but so far so good. TLDR: I have four of these in my Cisco Nexus 3064-X. So far I have had zero problems.

  • Vidman

    > 3 day

    As of 1 week of operation, the optics work great in my Netgear NS510TX switches. I am not experiencing over-heating or connection problems as other reviews state. Switch port stats dont show any errors or drops. Time will tell how the optics due over the long haul.

  • Peter J. Cross

    > 3 day

    Use them on a MS120 meraki PoE Switch. Work great to get functionality on the 9th and 10th port.

  • JT

    > 3 day

    Plugged in, worked right away

  • Steve

    > 3 day

    This was for the Cisco MS 120 8LP

  • Jarod Grant

    > 3 day

    It’s better to know you can get fiber internet before you buy all the stuff for inside

  • Brett Lewis

    > 3 day

    Ordered these as a last minute replacement for a project, they came in on time and worked great.

  • dirtyJ

    > 3 day

    Bunch of these in a fat MicroTik switch alongside some fiber runs make for a very robust house network. So far these are running beastmode. Even better they came in cute little individual tins that the wifey repurposed in to succulent pots.

10GBase-T10GBase-T
1g sfp rj451g sfp rj45
premium materialspremium materials

The 10G-SFP-T copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7 cable. This is the first SFP+ transceiver that offers 10 Gb/s communication over this type of media.

Features:

• Supports Links up to 30m using Cat 6a/7 Cable

• SFF-8431 and SFF-8432 MSA Compliant

• IEEE 802.3az Compliant

• Low Power Consumption (2.5W MAX @ 30m)

• Fast Retrain EMI Cancellation Algorithm

• Low EMI Emissions

• I2C 2-Wire Interface for Serial ID and PHY Register Access

• Auto-negotiates with other 10GBase-T PHYs

• MDI/MDIX Crossover

• Multiple Loopback Modes for Testing and Troubleshooting

• Built-in Cable Monitoring and Link: Cable Length Measurements; Opens/Shorts

• Robust Die Cast Housing

• Bail Latch Style ejector mechanism

• Unshielded and Shielded cable support

Related products

Shop
( 2684 reviews )
Top Selling Products