Black Opaque Glossy Acrylic Sheets, 12 x 12 Plastic Sheet with 1/8 Inch Thickness, 3-Piece Black Opaque Acrylic Blanks for Laser Cutting & Engraving Home Decor, Wall Decor

I got this for laser cutter projects. The yellow is a nice color and the material came well packaged in a box with a bubble-wrap bag inside around the acrylic. Each sheet has brown masking material. Cant bet this for your laser projects under 12 -- I prefer cast acrylic and it cuts very nicely. My only constructive feedback would be that it would be nice if this vendor would offer more colors.

I brought this product to cut with diode laser , Xtool D1 , cut though this with ease, backing paper is easy to come off , package nice with the backing paper in a bubble wrap sleeve in a box, Not the cheapest acrylic but works well

These are pristine pieces of acrylic that are as expected. They are NOT clear nor transparent at all. They are fully opaque and slick. Beautiful but not see through. I suspect that all of these varying colors will be the same non-transparent products. If this is what you need, you are in the right place!

I ordered this to use for multiple purposes one being with a cricut maker. The thickness works well since the cricut has its limits, but against my laser I would go thicker. You can compare the 1/25 to shrinky dink film. The price is not over the top where ill be using it for engraving practice.

I got a new 60W laser cutter so this was my test for cutting Acrylic. It etched well, I found that 10% power at 100 mm/s is about right. I used a little higher power for the piece in the picture and its etched a little deeper than I was going for. 1/5 is a little thick for for this laser so it took two passes at 95% power and 10 mm/s to cut it but the cut came out fine that way.

Worked great with my laser cutter! I had to paint it with black acrylic to be able to cut it.

Cuts well on my laser. Scratch protector sheet on both sides

Like the other XTool acrylic Ive ordered, this came well-packaged (cardboard, bubble wrap inside) and all of the pieces were flat and chip-free. It cuts well. Not sure if I like the etching on black - doesnt really stand out - but this is a problem with all colored acrylic. Unlike the clear that I ordered (which had plastic film on one side, paper on the other), these had plastic film on both sides. I prefer paper, since its one less layer of plastic to melt and I find it easier to remove after cutting, but this is a minor problem. I used it to make some control panels - the holes and slots cut perfectly for switches, lights, etc. The etched labels didnt work so well - Ill have to figure out something else there. One advantage over cheap acrylic is that the odor is significantly less - I can actually open the compartment a minute after cutting without feeling like I was going to get knocked out. All in all, perfect for laser cutting on my K40 - Ill upload photos of etching after I get some results that I like.

The sellers web description says 12 x 12 Plastic Sheet with 1/25 Inch Thickness but actual size of items I received was about 11-11/16 inch square, or 297.5mm in metric - well short of 12 inches. (See uploaded image.) The thickness was 1.0mm as measured with a digital caliper, which is close enough to 1/25 inch as described. Otherwise the acrylic sheets looked great, and arrived well packaged in bubble envelope inside a protective cardboard box. Im giving it 4 stars due to the inaccurate size descriptions.

Selected White Translucent Glossy Acrylic Sheets, 12 x 12 Plastic Sheet with 1/8 Inch It is the perfect amount of transparency . You can backlight a sign with this. After a long time searching