Black Opaque Glossy Acrylic Sheets, 12 x 12 Plastic Sheet with 1/8 Inch Thickness, 3-Piece Black Opaque Acrylic Blanks for Laser Cutting & Engraving Home Decor, Wall Decor

I am really excited about this acrylic! As a small business owner who runs a craft/laser shop, I spend far too much time researching acrylic options. It’s nice to have thinner options for use with layering, and with light weight earrings. However the majority of the offerings on the market are either 1/8” or 1/4” thick, with the occasional offerings in the 1/16” category. This is the first 1/25” I’ve seen! So excited about it. I was curious if it would be almost TOO thin, but it has still has a decent weight to it. My one caveat is that 70% of laser mishaps involve burning acrylic, and the thinner the acrylic the easier to catch it on fire. Watch this one like a hawk while using, and definitely start on the faster speed and lower powder side of your settings.

I ordered the 12”x12” by 1/5” sheets. 1/5” was thicker than I needed however the next thickness down was not available as clear transparent. Delivery was fast and the packing excellent. Inside the Amazon box was another custom sized box, and the sheets were inside a padded sleeve too. Each sheet was covered on both sides with a protective film. These will not get damaged in shipping. If you are using these for cutting and shaping for your own projects you will be very happy. I was actually intending to use them as-is for display purposes and liked the well finished edges and rounded corners shown on the images in the Amazon description. However, in reality , the corners were not rounded and the cut edges had not been finished in any way. It’s hard to see in my pictures , but it is clearly different to the last two images in the advertising material, I am guessing they used a computer generated graphic rather than the real product and I felt it to be a bit misleading. The edges were an issue for my use case, but really the clarity and quality of the surfaces is more important for most use cases , hence 4 stars rather than any less.

I brought this product to cut with diode laser , Xtool D1 , cut though this with ease, backing paper is easy to come off , package nice with the backing paper in a bubble wrap sleeve in a box, Not the cheapest acrylic but works well

I got this for laser cutter projects. The yellow is a nice color and the material came well packaged in a box with a bubble-wrap bag inside around the acrylic. Each sheet has brown masking material. Cant bet this for your laser projects under 12 -- I prefer cast acrylic and it cuts very nicely. My only constructive feedback would be that it would be nice if this vendor would offer more colors.

As this was an Xtool Selected product and I was using it with my Xtool D1 Pro 20W laser, I felt pretty confident this would work well. First off, it arrived in a bubble wrap envelope inside a cardboard branded box. Each sheet is masked on front and back. With acrylic being so prone to scratches, I was really happy to see it so well-protected. You get 3 12x12 sheets inside the package. The red is a bright red and glossy on both sides. Each sheet is 5mm thick. Previously, I had only tried 3mm acrylic and the 5mm feels much more substantial. This stuff is THICK. For my first try, I used the Xtool Creative Space pre-programmed settings for 5mm red acrylic. Engraving comes out a nice frosted, lighter red color that is definitely easy to read for text. The suggested cut settings also worked well and popped right out (when I had the laser focused correctly), but there is a little melting on the bottom half of the cut (see photo). Its likely not an issue for most projects, but I may try lowering the focus a bit more and/or a few other tweaks to see if I can get it a little cleaner. As with lasering all acrylics, you want to make sure you are venting the fumes properly. For the amount and quality of the acrylic, Id say this is a pretty good buy and I will definitely purchase more in colors that work with my diode laser.

Nice great material. These acrylic sheets are nice and thick. I havent been able to do anything with them. Do recommend.

The color is very bright and beautiful. The quality is wonderful- no scratches. It came packaged great as well.

I ordered these acrylic sheets to cut down for small shelves in a custom niche in my home office that will hold small glass items and keepsakes. The niche is recessed into the wall, 8” wide/deep, and 60” tall. A smart light at the top shines down with color-changing effects, so I wanted the shelves to be clear. I chose these 1/5-inch-thick xTool acrylic sheets to ensure that they would not sag under the weight of small keepsakes. I ordered a 2-pack that arrived securely packaged and exactly as described. Each sheet measures 12” x 12”. The 1/5-inch thickness is heftier than I expected and akin to a 1/4” piece of heavy-duty glass, except it’s lighter than glass and doesn’t break. Each sheet is protected on both sides by a semi-opaque plastic film that peels off easily. Once the acrylic surface is exposed, it is crystal clear and blemish-free. When I cut the sheets down, I used a jigsaw. I left the protective film on while cutting so I would not scratch the surface, and I applied a 2-inch-wide strip of masking tape along the cutlines for more protection. These sheets are high-quality acrylic—crystal clear and quite substantial. I was impressed by the quality, and the price isn’t bad considering that all acrylic products have become pricier lately. I am happy with this purchase and will buy this product again if I undertake similar projects in the future.

This is an attractive three-pack of acrylic sheets in an interesting shade of red. XTool has packed them well in bubble wrap, and they arrived flat and unwarped. I performed a test cut using my Full Spectrum Laser 45W laser cutter. My typical settings - 20% speed, 100% power - worked like a charm, and the resulting star came out well. I will say that the protective coating was a lot harder to peel off than the paper layer on the ChemCast cast acrylic Im used to working with, so if youre doing a complex engrave you might want to consider peeling it off in advance and replacing it with blue tape or another similar protector instead. Everything was exactly as expected, and Id buy this product again. Five stars.