Tasodin Water-Resistance IP65, 12V Waterproof Flexible LED Strip Light, 16.4ft/5m Cuttable LED Light Strips, 300 Units 3528 LEDs Lighting String, LED Tape(Warm White), Power Adapter not Included

I got these lights over other similar ones because they were cheaper, and the reviews still looked decent. And theyre just that; decent. Very bright light, so I suggest purchasing a dimmer. Also, they are NOT resistant to humidity. Since its midsummer and I like to enjoy the milder days, Ive used command strips in periodic places along the lights to keep them up. But I cant really complain, since they were such a bargain. Theres room for improvement, but I was satisfied enough to buy another one for another room.

Adhesive sucks, but I didnt expect it to hold anyway I prefer to use hot glue on the edges to hold it down. I put these in a camper that I built as the lighting source and they turned out super cool look at the pictures for the results. Install was just as easy as lights that cost a couple hundred bucks a roll and it cost me $10... Just like many things you get what you pay for but I dont think buying the cheap ones here affected the lights for now Its been one year and they still seem to all be working

Works great.

This LED strip was just what I needed to brighten up the area inside and under my camper cabinets. I bought the soft white strip and am very pleased. The light strip is covered with a clear silicon rubber that makes the entire string very flexible, durable, and waterproof. Safe places to cut the strip are marked on the strip, making it easy to cut to length. Any length can be cut, as long as you cut where indicated. I cut three lengths to install in/under my cabinets. I cleaned off the clear silicon rubber covering to expose the solder pads with an exacto knife and easily soldered wires to the strip. The power and ground wires can be soldered to any set of pads anywhere along the string and it will power the entire string. Make sure to make the proper pos and neg connections, as LEDs are sensitive to polarity. Polarity is marked on the strip. The adhesive back sticks very well to a smooth surface. Very low current draw. Perfect for my installation. I have plenty left over and am looking for other places to use it!

***Update*** Still have issues with adhesive but I used a staple gun and made my own improvements. The lights themselves work great and look awesome. I received my package last week and I ordered the power source separately so I had to wait for that before I set the lights up. I set up my lights early evening yesterday and this morning I came downstairs and they were already drooping. I would’ve given it a higher rating if they adhesive worked better, as they looked great when I first set them up.

I use these lights to light up my front steps going into my house from my front porch. There are seven steps and in the dark the outside light by the door does not illuminate the depth or width of the steps very well. These look so great and light up the steps beautifully. They are extremely bright so I have them secured under the overhanging lip of my steps so they are not shining straight out. Several of my neighbors have also ordered these lights because they like the looks of mine so much.

Put these under my RV. Looks so good.

I needed to replace my existing lights under my RV awning because my old light finally quit working. The price was great and I received them in one day. They were easy to install but I did order some 3M tape that is specifically designed for LED strip lights. They work great and we’re exactly what I needed.