California Air Tools CAT-AUX10A Lightweight Portable Aluminum Air Tank, 10 Gallon, Silver

Nice tank, seems well made and lightweight as advertised. HOWEVER, the fittings are very low quality and I would have preferred to save $15 and not have them included. Right out of the box, the tire chuck was leaking. I removed it and noticed the quick connect leaked as well. I replaced the quick connect and filled it up again to find that the 1/4 turn shut off valve wouldnt stop air from coming back out. To top this all up, the T-junction snapped off when I was untying the valve and I had to replace that too.

very good customer service

I like the tank overall. The only thing that bothered me is that they put on a very cheap hose and tire chuck. I have already replaced the hose and chuck.

Have several cars that have leaky wheels or tires. Bought this because once you fill it, you can quickly top off your tires, without waiting for a small compressor to do its job. In the winter no one wants to wait five minutes to top off one tire. This does it in under 30 seconds. That said I bought a longer coiled air hose, and a squeeze trigger with a built in tire gauge. Hose locks to the tire valve for one-handed operation. Keep in mind you do need access to an air compressor to refill the tank. Handy thing to have and great to put air in tractor tires in the field.

most of the hardware was left loose. the fitting into the tank was so tight, heat , cheater bar, nothing worked to loosen it up. one of the air fittings on the tank was pointing directly at the handle so you couldnt get an air line on. nice tank, terrible assembly. wont purchase from this vender again. I would bet nobody reads or cares about this review. chuck

I bought this product for the aluminum tank alone, knowing that the air intake and exhaust valve system was inferior and would have to be replaced. Otherwise very good.

So $60 to double the capacity of my California Air compressor, which is awesome and so quiet. No brainer, since the CA compressor just wouldnt run my air tools. Yes, a Harbor Freight one is a little less money, but then you have to retrofit ($) the correct fittings to make it work. The CA one is ready to go Steel, so no, not super light weight. If you want that, get their aluminum version Had one loose fitting, so I removed the whole valve assembly, teflon taped it all up, tightened, reinstalled. I would recommend tape anyway, since they use a goop that if the fitting is turned it will be forever loose and probably leak

Works great and very easy to fill

Good tank. Quick disconnect came rubbing against gauge. Finally got the fittings off and replaced all with quality fittings arranged how I wanted them.

I LOVE THE UNIT HOWEVER, AFTER FILLING IT TO 120 P.S.I. AND NOT USING IT AT ALL I DISCOVERED THREE HOURS LATER IT WAS EMPTY! THE FILLER CONNECTION WAS NOT TIGHT NOR EVEN ANY SEALANT TAPE AT ALL ON IT.. BAD QUALITY CONTROL!!!!!