KILMAT 50 mil 50 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening

Have used these on multiple vehicles and am very happy with the quality and price point. They stick very well! I recommend getting a set of rollers to really put some pressure when installing. I lined my trunk/hatch area in my 07 Honda Fit and noticed it was quieter (even with the wind noise Fits are know for:) I follow it up with some sound deadening mat. Very happy with this product! Would and have bought again!

It removed almost all of the resonances inside my TrailBlazer SS and quieted the ride overall. I did use two boxes to get everything, including the inside of the car roof and inside wheel wells and door banels. Lining the overhead made a huge difference, I definitely recommend doing this. My AC seems to work so much better now and the car just does not get as hot inside, at least not anywhere near as bad as it used to when left sitting in the sun all day.

This is a lot of material and it goes a long way. I did the back wall of my truck and have at least 35 sheets left. I may add more elsewhere. It cuts super easy with scissors or a razor knife and molds into place. I got the roller tool which was great for flat areas and found a screwdriver handle worked great for smaller, hard to reach areas.

This stuff is legit. Just as good as the big box names and a fraction of the cost. Goes on easy. Smoothes put nicely and quick. Very easy to work with does what it says it does. One box goes a long way while doing a jeep wrangler. Only used about a quarter of the box so far and have gotten the rear cargo area floor done and the passenger front floor pan. Highly recommended. Just be sure to get the three size install rollers and it will make your life easier.

Product was used in a 2018 Chevy Express Extended Passenger Van conversion. After gutting the van we lined the entire walls in back and side doors, wheel wells and ceiling with the product. On our first short trip to a National Park we were amazed at how quiet the interior was on the highway. We could not hear most cars passing by and semi trucks were very muffled. The only doors we did not apply yet was the driver and passenger doors and yet the sound dampening was awesome. The application process was fun and easy. The lines on the foil backing made it easy to measure and cut straight pieces to fit where needed. We did purchase a heavy duty pair of scissors at the DIY store for under $20.00 which made the cutting of product easy. We even used some of the backing paper to create templates of some of the more challenging areas and used outline to trace onto back of product for a perfect cut and fit. We purchased two boxes and have a half a box left. Oh yea, we also purchased the metal rollers recommended for pressing the product securely against the area applied. One more thing, one of the reviews for this product recommended using a metal spoon to press product in hard to reach areas and it worked great.

I used all but 2 sheets. It forms well and sticks like crazy!

Absolutely awesome. I used these in my 67 Camaro (350 cid with stock dual exhaust manifolds and exhaust system). Very easy to install (place mat down for fitting), applies easily (use a roller), sticks very well. The noise reduction is incredible. You can hear the engine, but significant reduction in road and exhaust noise. Conversation volume is at normal level. My buddy made a phone call and was able to speak at normal levels and no issues hearing conversation. It’s like riding in a new car. Very happy with purchase. Great product and great price compared to other sound deadening materials.

It is easy to handle, easy to cut, easy to apply just over all easy. The hardest part is probably the assembly and reassembly of your vehicle. I used this for my 2022 Nissan Altima.

Great product for what I needed for sound deadening the cab of my 1961 Ford Pickup project. Installs easily and quickly with no mess! highly recommend!

2013 Toyota Tacoma I took the headliner down ,the doors apart and installed. It works great when it rains I dont feel like Im under a tin shed in Bali. It dont hear the highway noise while driving. Its a huge improvement for the price. The panels are easy peal and stick. I used scissors when I should have used a board and razor to cut. the adhesive built up on the scissors, I read alot of reviews Ive never used the other brands that are more expensive just this one, in the roof and doors and I think they work great. I did notice a little smell of adhesive the next day, but not the day after. They have held up fine even after 2 months of living on the sun in Az during this summer none of the adhesive has failed or smells. I pleased my other Tacoma buddies bought it also and they are pleased Im buying again to do the bottom. One big box has done the roof and 2 doors with one panel left . I doubled some areas here and there I might have had more. I also bought the up graded roller after reading reviews it kicked butt , in 2 months friends have borrowed it after I was testing subject they use it extensively, and got it back in fine Im pleased.