KILMAT 50 mil 50 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening

This product is very easy to install and adheres very well. My car has about 1/2 the road noise it did before. Its also one of the least expensive products that actually does what it says. Very happy with the purchase.

Ive bought this twice now for two separate restore jobs. Its pretty easy to apply to the metal. Its pretty easy to position where you want it and then cut out the areas for the seat bolts and seat belt bolts. If you prewire the stereo wires to the back, this stuff will also cover up those wires pretty well. buying the roller was a waste of money. I stopped using it and just used my hand to press this stuff down since the floor of the truck isnt smooth and the back is that shiny slick foil stuff. I also noticed that when I had small areas of over lap, like when I was setting in an inside corner with two pieces, if you press a little harder you can hardly tell its double thick-just in case youre wondering if it could make the carpet bulge a bit, it doesnt.

Please please use gloves while applying the mat , not latex gloves unless you want to fight the stuff sticking to you constantly, Im talking about some good gloves. I made the mistake of not wearing gloves because I feel things better without them, gloves just have never worked right for me . But man oh man this stuff edges are sharp I sliced and diced my hands up so bad , Im talking I look like I got into a fist fight with a razor blade lol ...No fault of the company, it does say wear gloves .. 100% my fault. Just a consumer, I wanna let you know WEAR GLOVES !! Besides that , love the product have used in both my vehicles and have recommended to friends . Easy to use Easy to roll and Easy to cut to fit (also easy to cut fingers haha)

I used this material to line the cab of my RV. Cab noise was so loud before installing this, that trying to listen to the radio was pointless. Pulled up my carpeting, and installed these sheets on floors, inside the doors and inside the dog-house, and what a difference. The RV cab stays comfortably cool, no more hot foot on the passenger side. The road noise is markedly improved, and we can carry on a conversation without having to shout over the motor. Would highly recommend this product. Very easy to use and definitely worth it if you want to improve a hot, noisy area in your vehicle.

Great stuff. Easy to apply and was able to cut easily. Be careful when applying with your hands. I forgot how sharp the foil can get and sliced my finger.

Bought this to sound deaden a few things around the house, ive used Fatmat in the past and this seems to be just as good i also like that it has those rectangular bumps to let you know if it was applied with enough pressure. Used to sound deaden metal cart for 3d printer, my kitchen sink and my stainless steel trash can would defiantly recommend to put some on the bottom and sides under kitchen sink it kills the cheap tinny sound when doing dishes

Works amazing just some places needed too be doubled up

This product was easy to use and to place. Make sure you get some type of roller with the purchase.

For those looking for a good low-cost alternative to Dynamat, this is acceptable. I used both Dynamat and Kilmat on the same build. The Dynamat product was the Dynamat Xtreme. In contrast, the aluminum on the Kilmat is thinner and the butyl material smells A LOT like roofing felt... like EXACTLY like roofing felt -- definitely a bituminous odor. It is not overwhelming. I could only smell it with from about 2 away at normal temperatures By comparison the Dynamat Xtreme has ZERO odor. Nothing. The good thing about the Kilmat is that it sticks very quickly (used a heat gun to promote adhesion due to cooler outdoor temps but really did not need to) and the embossed aluminum makes it simple cut straight with one mark. Also, the packaging says it is made in the Russian Federation... so, those folks have a lot of experience silencing things so this will likely work very well. I just hope its not made out of Chernobyl chunks else my build will put a new meaning on the term radioactive.

It removed almost all of the resonances inside my TrailBlazer SS and quieted the ride overall. I did use two boxes to get everything, including the inside of the car roof and inside wheel wells and door banels. Lining the overhead made a huge difference, I definitely recommend doing this. My AC seems to work so much better now and the car just does not get as hot inside, at least not anywhere near as bad as it used to when left sitting in the sun all day.