60-Pc Master Tap and Die Set - Include SAE Inch Size #4 to 1/2” and Metric Size M3 to M12, Coarse and Fine Threads | Essential Threading Rethreading Tool Kit with Complete Accessories and Storage Case

Its really great tool.. Great quality and do the job as well.. Actually I dont accept that it will work but I was wrong its really doing the job in the great way and very easy.

I cross threaded one of the 1/4 inch lead/stainless hurricane shutter mounts in my cement block wall (here in Florida) and it would be a mess to pull it out and try to replace it. I was able to use the 1/4 inch tap to repair the threads and make the existing mount usable. The tap was able to cut metal on what I think is stainless steel in the mount. This was worth most of the cost of this set. As others have noted, the tools that go with this kit are 3rd world quality but the taps and dies themselves seem to be ok. This is a great kit for the homeowner but probably not for industrial use. Due to close quarters, I had to hold the tap with a pair of pliers to do the work, as there was no suitable tool to hold it supplied. As others have noted, after spending some quality time re-arranging all the tools in the case, I took the suggestion to add a piece of cardboard to the inside so that the tools would not bounce out of place anymore.

..Go Slow and use plenty of Oil !! pros- they cut some perty threads, are sharp and made from some good material Cons- tap and die handle tend to loosen up in use. the dies take a bit of fiddlin to get started straight. Not a bad set for occasional use or to chase threads.

The Tap holder would not securely hold Taps less than size Metric M 8, and SAE 10. The cut and finish of the Dyes and Taps is very good. The quality is somewhat less than the very best dyes available and very much better than the cheap ones. I have not used them on hard Metals yet, but they performed very well on cast aluminum.

Worked great for a job i did with my t/a cluth blew up and broke alot of bolts striped alot of them

I order this to be able to tap 3 stripped out spots on my trucks transfer case. I used a little bit of used motor oil as cutting fluid and this kit worked flawlessly. It definitely paid itself off on my first use. Side note, I accidentally knocked this kit off my toolbox and all the parts stayed in place inside the case, I did have it latched closed.

This was made from Cheap material. Brittle and breaks.

Works great!!

You get what you pay for

From what I have used of them so far they seem to be of quality craftsmanship. And even beat Harbor Freight prices