StarTech.com 6U Wall Mount Network Rack - 14 Inch Deep (Low Profile) - 19 Patch Panel Bracket for Shallow Server and IT Equipment, Network Switches - 44lbs/20kg Weight Capacity, Black (WALLMOUNT6)

I purchased the 6U version to replace a 4U version from the same company that I had outgrown. This 6U model has similar features of being easily wall mountable, securely holding a Unifi USG, Cloud Key Gen2 Rack Mount accessory with Cloud Key, Unifi 24 port non POE switch, 24 port patch panel and vented shelf for a Unifi 8port POE switch. The rack feels solid with no side to side movement. Note I left the cross support structure on the rack but once items are mounted in the rack I would expect it would have been solid with out the cross support. I was able to move the cross support to the bottom of the rack (rack has threaded mounting holes for the cross support on the top and the bottom) and faced the cross support so it extended away from the inside of the rack to allow the bottom device to insert into the rack. This model of network rack is very reasonably priced and a good value for the spend for a home network.

I bought this rack unit because Ive started to get some new gear for my personal music/recording studio. I currently have an Avid Eleven Rack and a BBE 362 Sonic Maximizer as rack-mount effects. Let me say this unit is a beast and sturdy as a tank. As shown in the pics, it holds my rack FX perfectly with three additional spaces leftover (the 11 Rack uses 2 spaces all by itself) and still has plenty of room to hold my old Mac Mini and my Behringer audio interface (U-Phoria UMC204HD). The top is open, but I found a perfectly sized spare shelf I had to place my HD monitor on top of the whole setup. The rack unit comes with the stabilizer bar already assembled and everything ready to go. In the fairly large box it came in I received the rack unit, a one-page instruction manual in a plastic binder sleeve, and all the necessary accessories bubble-wrapped and zip-tied to the unit itself. Everything I needed, in other words—with plenty of space for cord management and airflow in the back of the unit. Included are enough rack screws, clip nuts, and washers to install 3 or 4 rack-mount effects. It would be nice if they also included enough for the rest of the units shelf space (6 rack FX in all), but its definitely not a deal-breaker and not worth the removal of a star rating. If youre looking to get into rack-mounted FX for yourself, give this bad boy a try. You wont regret it.

I have two stacked on top of each other. In the image you can see how its not properly manufactured. I had to remove the crossbar and force the width on the lower part so I could get the rack mount equipment into the rack. Its tapered and you have to bend it outwards. Usually Im really happy with this brand (Startech), but I really wasnt too happy with this. I will mention that it sort of looked like it was returned and repackaged, comparing it to the new one. I managed to get it working because I didnt want to return it. But frustrating nevertheless.

I like this rack but they only supply enough screws and nuts for three devices. I buy the 6U because I need to mount 5 devices in it. You should know this before you are onsite, those nuts arent something you can buy at Home Depot/Lowes.

Arrived in great condition. Solid, well made rack that is holding UDM Pro, 24 port switch, 1U shelf, and patch panel perfectly using rack studs. Would buy again.

Overall, this is a solid 6U rack, but there are some definite issues if you attach it to a wall. 1. The screws and wall anchors are a disaster waiting to happen. Theres no way that it will hold for a long period of time. You will need to use your own screws, preferably 2 wood screws and will need to drill directly into the stud. If you dont have studs around the area, then you will need to put some backing boards and will need to install into those. Not the prettiest if it is being installed outside of a closet, but the artwork should be left up to you. 2. There is only enough screws to install 3 units. Why? Why would I not be provided with the full 24 screws needed instead of just 12. Horrible. Decking an entire star because of this nonsense.

Purchased this case for my new network a few months ago. Everything fits perfectly on it. It is of adequate gauge steel, so it serves its purpose. Would have been great if it would have come with a bottom vent cover. That would make for a cleaner final install, so I had to create my own. Overall good product and would recommend.

I love almost everything about this rack. Not too big, not too small, feels sturdy, looks good. Using this for a home network with LAN drops in every room. The open design worked well for my purposes. My biggest issue was the mounting itself. First on that, it does come with M5 (not M6 as described) cage nuts and bolts. I was mounting this to some open studs by myself which is always a little awkward. Anyhow, the provided wood screws’ heads were exactly the same size as the holes in the back of the rack. This means that you can’t screw in the wood screws and place the rack over them and slide it in to place. You would HAVE to have someone else hold it in place while you screwed it in. I also managed to strip 3 out of the 6 provided so I went out a bought #10 x 1-1/2in screws to replace the originals. They worked perfectly. I was able to slide the rack right over the top of them which made the mounting take all but 10 minutes with 9/64 pilot holes. After it was mounted, everything is perfect and beautiful. Pros: Cost, value, aesthetics, size, prime delivery, relatively light weight, sturdy. Cons: Hardware (both M5 cage nuts which should have been M6 as well as the awful wood screws)

Excellent construction. It works well for patch panels, power, and maybe a CloudKey, but it won’t work for long equipment like an NVR or full server

I needed something that would fit under the stairs for a patch panel and UDM pro. This is perfect. Well made and easy to install.