













TCP/IP 4 Door Entry Access Control Panel Kit Electric Strike Fail Secure NO Mode Lock Enroll RFID USB Reader 110-240V Power Supply Box RFID Reader Phone APP remotely Open Door
-
Dr. Alec Zboncak
> 24 hourExcellent Product! I high recommend it!
-
Daniel
> 24 hourThe system and instructions were easy to follow and set up. when I had a few questions, I
-
Ray W. Lim
> 24 hourThe system is perfect for a small to medium sized business operation and can accomodate at least 200 employess with the provided key fobs and access cards. If you need more, this package has the numeric password entry on the reader as well. Everything you need is provided in this package (except the wires depending on the size of your building, but just use network cat5 cable, simple enough. Best thing I like about this product is its reasonable pricing, parts look sturdy and built with quality, and lastly, the SUPPORT TEAM IS EXCELLENT ! THEY RESPOND VERY QUICKLY AND ANSWERED ANY TECHNICAL QUESTIONS ADEQUATELY ! I HIGHLY RECOMMEND IT !
-
Raheem Larkin
> 24 hourI purchased this system to install at a clients laundromat to setup 24/7 access for customers. The setup was easy and configuration was pretty straight forward. For some minor questions I had, tech support responded to my email within minutes and was very helpful. The system is up and running and works great! I highly recommend this product to those who are looking for a budget friendly control access system.
-
Jon Lax
> 24 hourBought this system to control 4 doors within our office. The system was easy to set up and wire. Package came with everything needed. Software is user friendly. We did have a couple questions with the set up and tech support was excellent. Fast reply and knowledgeable.
-
chris cox
> 24 hourTech support was fast and got us going immediately. This is our 3rd unit and we are very pleased.
-
That netadmin
> 24 hourThe setup is straightforward, there are pictures and wiring diagrams for the various way you can setup your doors and readers. We needed to know how to have 2 readers operate one door (reader on the inside and reader out the outside). The vendor sent back a picture already made of how to do it, and a link to the diodes needed to be wired into the lines. I got those and wired them in and everything works now. The software is a bit difficult to use at times, and it does a lot that we have no need for (time tracking by using door entry and exit and such). But the whole system works great and is a lot cheaper than the system we had in our old office. We got a glass door attachment as well for the lock and it worked with this system fine. We were even able to use the door striker locks that already existed on the doors, which saved a lot of time. A+ for the help that BRs/Wood Chen gave me in the 2 readers 1 door question.
-
Donnie Slagle
> 24 hourBought this system for a church. Installation instructions and setup from seller were very clear and helpful. Had a few setup questions for Tech support. Emailed them several times and their response was very fast and helpful. Would recommend this product for anyone needing to control access on four doors.
-
Martin Dalby
> 24 hourI ordered my system not realizing it was RFID and I needed HID. They were very understanding and got me what I needed to make it HID at a very reasonable cost. Great to work with on every question I had. Our maintenace department to 6 moths to install everything do to plant breakdowns and I ended up missplacing my installation CD and had not seen it in months, they helped me with links for everything I needed.
-
Corey Delemar
> 24 hourI purchased this system for a client and I must say that I am very happy with the performance. The wiring diagram was pretty easy to follow. From setup, to wiring, to programming this system was easy to use. I used 18/8 solid copper wire so that I only needed to run one cable to make all of the connections at each door (mag lock, RFID reader, and push to exit). You will need to develop your own color code because the colors wont match the colors of the 18/8, but thats pretty simple. My client is able to use the web interface with very little instructions. I did three doors and Im waiting for construction to complete to do the last. I may be moving over to this line for customers in the future.